Monster Keyboard How To Change Color

MONSTER PUSAT K3 Pro Mechanical Gaming Keyboard User Manual

Dear User

Thank you for choosing Pusat make. To Protect your rights and for amend costumer service, we inquire you note our warranty rules.

Within 24 months from buy appointment, repair guarranteed for failure due to electrical circuit issues. Human-Fabricated damages, such every bit disassembly, hard impacts, submersion into water, plugging into improper electric current or voltage, and damage caused by natural disasters such as fire, flood or earthquake are not included.
Consumable office (such as foot stick) and spare parts replacement, are not included in our warranty.

O. S. Support
Windows XP/Vista/vii/viii/10

FAQ

If the keyboard doesn't answer, please check if the keyboards USB cable is Correctly inserted into the corresponding USB port on the computer, or effort another USB port on the calculator.
If you spill liquid on the keyboard, delight remove keyboards USB cable from the computer immediately. Wipe up excess liquid and put the keyboard in a warm identify (for instance, under a lamp) to let the keyboard dry out naturally earlier using once again.

Function Instructions

Computer USB port interfaces with the keyboard without needing to install drivers or software.
Multi-level backlight brightness: Press and hold the [FN] cardinal, and then press the arrow cardinal "↑"to increase the backlight brightness of the keyboard. Press and agree the [FN] primal, and so press the arrow key "↓"key to decrease the backlight brightness of the keyboard.
Adaptable lighting direction: When backlit keys are cycling through effects press FN + [←]to change directions. Adjustable colors: Press FN+[→] to change backlight colors.
Adjustable lighting result speed: Press and concur the [FN] primal, and and then press the + key "+" to increment the speed of the lighting issue. Press and concur the [FN] cardinal, so press the – central "-" to decrease the speed of the lighting outcome. There are 6 levels of adjustment.
There are eighteen backlighting effects:
<one>FN + INS = A. Trial B. Briefing C. Static
<2>FN + Dwelling house = A. Ripple Graff B. Pass without Trace C. Coastal <3>FN + PGUP= A. Hurricane B. Accumulate C. Digital Times
<iv>FN + DEL= A. Get with Stream B. Clouds Fly C. Winding Paths
<five>FN + End = A. Flower blooming B. Snowfall Wintertime Jasmine C. Swift activity
<6>FN + PGDN = A. Both means B. Surmount C. Fast and Furious
Adjustable side LED lighting effect mode: Press and agree the [FN] key, and then printing the PAUSE key "Intermission" to change the outcome style. There are Moving ridge, spectrum, breathing, constant low-cal and off style (LED light can be customized, and the LED light on the board and side LED could be synchronized).
Adjustable side LED lighting speed mode: Printing and hold the [FN] key, and then press the SCRLK key "SCRLK" to change the speed. There are 5 unlike level of the adjustment.
To disable the [WIN] primal: Press and concord the [FN] cardinal, and then printing left [WIN] key to plow off [WIN] fundamental in lodge to avert leaving gaming function if user presses [WIN] key by mistake. Repeat the above operation to restore the function.
[Volume Scroller Key Control] Press to switch between Effulgence and Book adjust modes. Light On – To adapt the brightness of the keyboard backlit. Calorie-free Off – To adapt the Volume of the system. 10. [Macro Keys, G1 ~ G5] G1 ~ G5 default set up equally F1 ~ F5. When the "G" cardinal has macro content, the button lite volition exist on; when in that location is no content the light volition be off and perform as the default push part F1~F5.
[Macro Record Function "REC"] Printing the "REC" push to be solid light to start the recording function, the NUM, CAP, SCR, WIN indicators will flash slowly, and then select G1 ~ G5 to flash rapidly to exist the corresponding button to be stored. Press the valid button to kickoff recording, the maximum will be 64 normal buttons or inside 30s. The recording volition exist automatically exit and save or press the REC push later the recording is completed.
[Erase Macro Office] Press the "FN" + "REC" and concord for 5 seconds to erase all the Macro settings. Erase specific Macro key: Printing the "REC" button to be solid low-cal to first the recording function, the NUM, CAP, SCR, WIN indicators will flash slowly, then select G1 ~ G5 to flash apace to be the corresponding button to be erased. Printing "REC" key push to consummate the erase process. After the Macro has been erased, it will become back to default setting as F1 ~ F5.
[LED Memory Keys, M1]
Press M1 to light up the LED of Due west /A /S /D /↑ /↓ /← /→ keys (default: Cerise color) with stored setting.
[LED Memory Keys, M2]
Printing M2 to light upwards the LED of ESC/ TAB/ SHIFT_L/ CTRL_L/ ane/ 2/ iii/ 4/ 5/ Q/ West/ Eastward/ R/ A/ Due south/ D/ F/ G /SPACE keys with stored setting.
[LED Memory Keys, M3] Press M3 to calorie-free up the LED of ESC/ `/ ane/ 2/ 3/ 4/ TAB/ Q/ Due west/ E/ P/ A/ S/ D/ F/ G/ Five/ B/ CTRL_L/ SPACE keys with stored setting.
[LED Memory Keys, M4] Press M4 to calorie-free up the LED of ESC/ 1/ 2/ three/ 4/ 5/ 6/ TAB/ W/ A/ S/ D/ F/ L/ Z/ X/ C/ V/ CTRL_L/ SPACE keys with stored setting.
[LED Macro Record Key, MR]
Press the "MR" fundamental in one case to offset the LED Macro Record way. The NUM, CAP, SCR, and WIN indicators volition flash slowly. Then select M1 ~ M4 to specify the recording central. The corresponding button will flash quickly to first to record. Press the valid button on the keyboard to tape the calorie-free setting and within 30s it will automatically exit and save the setting. Or press the "MR" key after recording is comp leted to exit and save the setting.
[Erase LED Macro Setting]
Press the "FN" + "MR" and hold for v seconds to erase all the LED Macro settings. Erase specific LED Macro key: Press the "REC" button to be solid lite to start the recording part, the NUM, CAP, SCR, WIN indicators will flash slowly, then select M1 ~ M4 to flash chop-chop to be the corresponding push to exist erased. Press "MR" primal to consummate the erase procedure.
[Default Setting] Press the "FN" + "PRTSC" to reset the setting to default.